Contact Us

TEL: +86-755-26664885
Fax: +86-755-27898086
E-mail: sales@wellspcba.com
Address: 3/F, Yinjin Industrial Park, Liuxian 2 Road, Bao'an District, Shenzhen, Guangdong, China

Home > Blog > Content
Automatic optical inspection, AOI systems
Jan 23, 2018

Automatic optical inspection, AOI systems

- key points for AOI, automatic or automated optical inspection systems used in electronics PCB printed circuit board manufacture.

Automatic or automated optical inspection, AOI, is a key technique used in the manufacture and test of electronics printed circuit boards, PCBs. Automatic optical inspection, AOI enables fast and accurate inspection of electronics assemblies and in particular PCBs to ensure that the quality of product leaving the production line is high and the items are built correctly and without manufacturing faults.

Need for AOI, automatic optical inspection

Despite the major improvements that have been made, modern circuits are far more complicated than boards were even a few years ago. The introduction of surface mount technology, and the subsequent further reductions in size mean that boards are particularly compact. Even relatively average boards have thousands of soldered joints, and these are where the majority of problems are found.

This increase in the complexity of boards also means that manual inspection is not a viable option these days. Even when it was an accepted approach, it was realised that it was not particularly effective as inspectors soon tired and poor and incorrect construction was easily missed. With the marketplace now requiring high volume, high quality products to be brought to market very quickly very reliable and fast methods are needed to ensure that product quality remains high. AOI, automatic optical inspection is an essential tool in an integrated electronics test strategy that ensure costs are kept as low as possible by detecting faults early in the production line.

One of the solutions to this is to use automated or automatic optical inspection systems. Automated optical inspection systems can be placed into the production line just after the solder process. In this way they can be used to catch problems early in the production process. This has a number of advantages. With faults costing more to fix the further along the production process they are found, this is obviously the optimum place to find faults. Additionally process problems in the solder and assembly area can be seen early in the production process and information used to feedback quickly to earlier stages. In this way a rapid response can ensure that problems are recognised quickly and rectified before too many boards are built with the same problem.

Wells pcba factory have very  perfect test system ,AOI is the most basic test.all the PCBA will past AOI test to ensure no human errors.


Previous: Automatic test equipment ATE Primer

Next: How Do You Inspect QFN Components?